Whole Tyre Shredder to Rubber Granule Machine with Ce
Specifications
1.Waste tire shredder machine
2.Make waste tire break into powder
3.Make the tires of steel fiber is completely separate
waste tyre shredder machine / car tire shredder machine
1.tire shredder machine
this machine is a special equipment for crushing waste steel wire radial tyre under normal temperature, used for take out the steel wire of tyre in the scope of the size.
2.Characteristic:
this machine has the structure compact, advance technology, low powder consumption, high efficiency, crushing room with off-structure. Easy to maintenance etc. The machine adopting excellent hard alloy steel as it blade, highly hard and wearable is druable; circle mesh screen has grindding structure, dropping pieces with large area is good for the rubber pieces.
| Model |
LPS800 |
LPS1200 |
| Specification of raw material |
≤800 mm |
≤1200 mm |
| Specification of Finished material |
50*50 mm |
60*60 mm |
| Capacity |
2-4 t/h |
3-6 t/h |
| Mototr power |
48 kw |
114 kw |
| Dimensions |
2450*2140*2490 mm |
4000*3100*3500 mm |
| Weight |
4.8 t |
17.5 t |
Structural features
The shredding chamber is closely mated with the lefthand drive. The power will be effectively transmitted to the cutter shaft. The cutter consists of blade and hooks. Anti-wear and corrosion proof hard alloy is built-up welded on the working face of the cutter
The shredding chamber is a combined structure and the cutter shaft adopts rolling bearings ,which is convenient for both installation and maintenance
The cylinder sieve will repeatedly sent those unqualified chips or shivers back to shredding machine , while whose qualified ones will be let out of the sieve.
The transmission system adopts a NGW plantary hardenedgear. speed reducer , which is structured with features of lower noise , high efficiency and longer service life.
The configuration of the shredder is compact and collated . it is easy and reliable for operation and convenient for installation and maintenance
parameters of tire shredder
| Specification |
LP-1500 |
LP-1200A |
LP-800 |
| Cutter quality |
15 |
22(18) |
16 |
| Rotating speed of cutter shaft (r/min) |
10 |
15(13) |
16 |
| Capacity (kg/h) |
2000 |
2000 |
1000 |
| Feeding requirement |
≤1200 |
≤900 |
≤750 |
| Discharging (mm) |
Strips( 100mm wide) |
Strips(50mm wider) or blocks (50*50mm) |
Strips(50mm wider) or blocks (50*50mm) |
| Main motor power |
55*2 |
75 |
45 |
| Speed reducer |
Hard facing gear reducing |
| Overall diamensions |
4950*2000*3050 |
5960*2800*3390 |
4100*2100*2280 |
| Weight |
23000 |
14500 |
7000 |
Audited Supplier 
){kind=link}
){kind=link}