| Customization: | Available |
|---|---|
| Certification: | CE, ISO, SGS |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. CE, ISO, SGS, excellent seal and long life.
2. High production efficiency, low mold-locking speed, protect mold.
3. Less energy consumption, low noise, without oil spilling or off pressure.
4. Reliable structure, easy to be operated.
1.Moulds could be produced as customer's requirement
1. Small investment, High ruturn 2. Automated temperature 3. Processing easily and low noise 4. Equipment has integrity
Rubber tile is made of two layers of different rubber granulates, color granulates are fine granulates or rubber wire in surface, the bottom layer is thick rubber granulates or rubber wire.
Following is the main processes:
1.conching: Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir, this process requires for 46 minutes ( because the adhesive is easy to cure, so stir it when use ).
2. Weighing raw materials: weight the rubber granulates stirred, according to the granulates' thickness requirement of the tiles .
3. Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it by trowel. Firstly paving the surface rubber granulates which is fine and color, then the thickness and black.
4. Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of vulcanization accord to the thickness of the rubber tiles, in general, 38inutes finished. After that, Mold separate automatic, then remove floor tile on the shelves to dry.
5. Inspecting: Inspect the surface of the floor tiles formity, no aberration, no flaw, line with the product quality.
2. Advantages
1. PLC control, high level automatic.
2. New heating insulation material, withstand pressure, high heat resistance.
3. Equipped with hydraulic auto guard device so ensure of the quality of belt edges, and improve the working efficiency.
4. The vulcanizing press can distribute the pressure averagely.
5. Equipped with a unique heat balance system; it can control the deformation and improve the belt quality.
3. Technical parameter
| Parameters |
Version |
|||
|
XLE-Q400*200 |
XLE-Q400*400 |
XLE-Q400*600 |
XLE-Q400*1200 |
|
|
Mould closing force(MN) |
0.25 |
0.5 |
0.8 |
1.6 |
|
Platen specification (mm) |
400*200 |
400*400 |
400*600 |
400*1200 |
|
Platen unit area pressure |
2.5 |
2.5 |
2.5 |
2.5 |
|
Main motor power |
2.2 |
2.2 |
2.2 |
3 |
|
Size (length*width*height) |
3200*1050*1730 |
3200*1050*1730 |
3200*1050*1730 |
3200*1050*1730 |
|
Weight (kg) |
4000 |
4500 |
5000 |
8000 |
){kind=link}