Xjd-65 Silicone Cable Rubber Extruder

• Customization: Available
• Certification: CE, ISO
• Condition: New
• Model NO.: XJD-65
• Customized: Customized
• Automatic Grade: Automatic
• Type: General Rubber Machinery
• Type of General Rubber Machinery: Rubber Extruder
• Type of Tire Machinery: Rubber Regeneration Machinery
• Advantages: High Performance-Cost Ratio
• Style: Cold Feed Rubber Extruder
• Bush: Bearing Bush
• Reducer: Hardened Reducer
• Transport Package: Wooden Cases or According to Your Needs
• Specification: CE Standard ISO9001certificates
• Trademark: GuangYue
• Origin: Qingdao China
• HS Code: 8477800000
• Production Capacity: 30 Sets/Month

Product Description

1. Conductor diameter: 0.3~6.0mm. (Diameter the size of the mold to be equipped with the corresponding)
2. Wire diameter: 3.0mm~25.0mm.
3. Max. Wire speed: 0~100m/min.
4. Center height: 1000mm.
5. Power: 380V+10% 50Hz three-phase five-wire system
6. Operation direction: Host (from left to right operate)

1) Screw
A) Type: Silicone expert screw
B) Diameter: Host Ø 90mm;
C) extrusion amount: Host 140kg/hr; (handpiece open);
D) Host L / D: 12: 1 (effective length)
E) turn number: 5-54rpm;
F) Material: 38CrMOAI, surface nitriding treatment, hardness the HV840 above;
G) the screw process: Normalization - roughing - annealing - quenching and tempering - finishing - nitriding treatment - polishing;
H) screw exit: Screw since the rear side of the gearbox to the drill rod gently tapping launch.

2) screw cylinder
A) Material: 38CrMOAI, surface nitriding treatment, from the gear box to head full-length segment junction;
B) screw cylinders Process: Normalization - roughing - annealing - quenching and tempering - Finishing - nitride handling - polished aperture hardness the HV920 more.

3) Transmission:
AC motors - imported from Taiwan belt - deceleration into the gear box - screw; Pulley and gear box after the balancing correction, smooth machine.

4) Gear Box: (imitation Italian square)
Helical gear material 20CrMnTi, quenched and tempered, finishing surface hardening treatment, and three grinding, gear grinding machining, gear hardness HRC35-40 degrees; Gear wheel surface hardness HRC58-62, the degree of operating noise: <75dB / the 1.5M distance; Gear box after annealing treatment processing; Quality imported self-aligning bearing.

5) adjustable nose:
A) Type: 90-degree flow pattern in carbon steel to HRC32-35 degrees, the flow channel are rigid plating, the guide tube in carbon quenched and tempered, grinding, hard plating Forehearth; Adjustable eccentric. Notes to the bar hole.
B) a locking device: Both sides of the crescent-shaped clamping device, single nut locking, easy operation, with a nose support jib;
C) Applicable diameter: Ø 3.0-- Ø 25.0 (Please provide customers with a mold or a wire diameter mold size)
D) honeycomb plate: Special steel, 3.0 to 3.5 mesh;

6) drive motor:
Ø 90 host 30KW AC motor, choice of imported inverter;

Machine model	XJD-45	XJD-65	XJD-90	XJD-115
Main power(HP)	10HP	20Hp	30	50
Extrusion capacity(kg/h)	30kg/h	60kg/h	150kg/h	250kg/h
Screw diameter	45	65	90	115
L/D screw	12:1	12:1	14:1	14:1
Pay-off bobbin	300-400mm	400-630mm	1000-1250mm	1250-1600mm
Inlet diameter	0.2-3.0mm	0.3-5.0mm	1.0-20mm	3-45mm
Extruded diameter	0.8-5.0mm	1.8-8.0mm	3.0-20mm	6-55mm
Vulcanize length	12m	16m	24m	28m
Heater power	36kw	48kw	72kw	84kw
Traction power	3kw	4kw	7.5kw	11kw
Line speed	6-80m/min	6-80m/min	4-40m/min	4-40m/min
Take-up bobbin	400-500mm	400-630mm	1250-1600mm	1250-1600mm