Factory Direct Sale Waste Tyre Recycling Machine With High Quality
1. Ring cutter
This machine mainly used to cut the sidewall of steel wire tire, and then to the next step of segmentation. First, put the tire on the platform, then rotate the hand wheel, the three claws will stick the inner tire firmly, Second, Starting power, work platform will rotation, cutting tool according to need to cut tire slowly step by step. Until the tire side cut off.
2. Strips cutter
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.
3. Block cutter
Block cutter is designed to cut car, truck and rear tractor tire. Range is up to 120cm truck tires. The tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system, The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.
4. Bead wire separation
Be utilized to separate rubber and steel wire of bead in order to get whole steel wire.
Feature: It is easy operation, easy to be installed and maintained high efficiency and clean etc.
5. Tyre crusher
This machine is mainly used to crush waste tire and rubber. The structure is gear transmission.
Structure:
This kind of machine consists of seat, Rack, two rollers, motor, cooling system, heating system etc
1. Rollers are made of chilled cast iron, which are abrasion resistant with long service life.
2. Rear roller is equipped with distance adjustment device, easy operation and convenience, turn the turbine to adjust the distance
3. Perfect emergency stop device can ensure the safety of personnel and equipment.
4. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil.
5. Human nature designed operating system reduces labor intensity
A load test running will be made to the assembled equipment in our company to save debugging time for customers.
1)Gap adjustment mode:
Manual or auto; Grease or thin oil
2)Lubricating method:
Manual or auto; Grease or thin oil
3)Emergency stop device
Pull rod and emergency button
4)Roller bearings:
Nylon Bushing or Copper Sleeve or Spherical Roller Bearing
If you are interested the products, please contact me, I will try my best to tell you the details. Looking forward to your reply.
| Equipment name |
Quantity |
Equipment specifications and function is introduced |
Main
machine |
Rubber crusher |
1 |
Type: SW-350/SW-400 /SW-450 /SW-560
Scrape tire rubber pieces and miscellaneous glue grinds broken. |
For
With
a
set |
Steel wire separator |
1 |
1. Make tire side and tire top joint use a knife to slice;
2. Make the side of the tire and tire top complete separation. |
| Strips cutter |
1 |
Cut off the side of the tire tire cut into strips, tires circle mouth retained |
| Rim cutter |
1 |
Cut into strips of tires, cut into 3.5 centimeters square blocks |
| Big vibrating screen |
1 |
Make powder for the first time sorting (8-10 mesh) |
| Small vibrating screen |
1 |
Make powder on the second sorting (20-30 mesh) |
| Big conveyor |
1 |
Used to transport not reached mesh request return to host continue powder and broken |
| Magnetic separation units |
1 |
Make the metal wire powder extraction separation |
Defibering
machine |
1 |
Make the fiber extraction MAO powder |
| Steel wire separator |
1 |
Make tire of coarse steel mouth circle parts with rubber complete separation. |
| Remarks |
Above unit is in the process of tires used to crush the machine |
Audited Supplier 
){kind=link}
){kind=link}