Xy-3L 360*900rubber Calender to Make Rubber Sheets

• Customization: Available
• Warranty: 2 Years
• Control Type: PLC
• Model NO.: XY-3L360*900
• Power Source: Electric
• Type: Rubber Calender
• Roller: Chilled Cast Iron Alloys
• Roller Spacing: This Can Be Adjusted
• Saler Service: Reply You Within 24 Hours
• Type of General Rubber Machinery: Rubber Calender
• Type of Tire Machinery: Rubber Regeneration Machinery
• Certification: Ce, ISO, SGS
• Weight: <50 Tons
• Power: 10~100kw
• Voltage: 220V/380V/440V as Customers Need
• Using Life: More Than 15 Years
• Transport Package: Within 20 Feet Container
• Specification: 4700*1700*2100
• Trademark: guangyue
• Origin: China
• HS Code: 84778000
• Production Capacity: 100 Sets Per Month

Product Description

Rubber Calender

1. Version: Two-roll rubber calender, three-roll rubber calender

2. Application:

Rubberizing and fractioning of textile material, rubberizing of wirecord fabric, sheet, and counter plate(embossed) of rubber material, separation of fabric and film, as well as joint of multi-layer laminate film.

2. General design:

It mainly contains roller, rack, backplane, adjustment, device, transmission system, roller temperature control device, security device, lubricating device, etc.

3. Features:

The roller is made of chilled cast iron alloys, whose work surface has high hardness, wear-resistent and durable life. Steam, cooling water, and heat-conducting oil can pass into the rollers cavity, so that the working temperature can be adjusted in order to meet the technical requirements.

Roll spacing can be adjusted both by manual or electric mode.

Roller bearings lubricating can adopt drier oil or dilute oil.






After sales service

1. We will offer you one year guarantee

2. We will reply you within 24 hours and give you solution to this problems

Mode & Specifications		XY-3L630(230)	XY-31900(360)	XY-311200(450)		XY-311730(550)		XY-311800(610)
Arrangements of rolls		L Form	I Form	I Form		I Form		I Form
Number of rolls		3	3	3		3		3
Working Diameter of Rolls (mm)		230	360	450		550		610
Working Length of Rolls (mm)		635	900	1200		1730		1800
Linear Speed of Middle Speed (m/min)		8.7	7.3-21.9	3-30	1.5-15	4-42	5-50	0-45
Rotating Speed Ratio of Rolls (UP:Middle:Low)		1:1:1 1:1.33:1	1:1:1	1:1:1 1:1.5:1	1:1:1 1:1.25:1	1:1:1 1:1.5:1		1:1:1 1:1.5:1
NipRange		0-6	0-6	0-10		0-20		0-25
Max. Roll Temperature		130	130	130		130		130
Min. Thickness of Products (mm)		0.2	0.2	0.2		0.2		0.2
Max. Width of Products (mm)		500	700	1000		1500		1600
Main Motor Power (kw)		7.5	40/13.3	75	75	132	160	160
Speed Reducer		Hard Facing Gear Reducer
Steam Pressure (MPa)		0.3-0.5	0.3-0.5	0.3-0.5		0.3-0.5		0.3-0.5
Cooling Water (Mpa)		0.2-0.3	0.2-0.3	0.2-0.3		0.2-0.3		0.2-0.3
Overall Dimension (mm)	L	2500	5400	6340	5580	8500	8700	8630
	W	1200	1900	2650	2680	3000	3300	3620
	H	1450	1910	2760	2615	3770	3770	.3875
Weight		3800	11000	22000	21500	41100	42000	51500
Note: Preloading Device Fixed with Top