XKP Rubber Cracker Machine for Rubber Powder Production Line / Rubber Crusher
1.Detailed Information
This machine is made up of one base, frame, front rollers, transmission gears, deceleration machine, adjustable from device, the temperature adjusting device, cutting knife components, the winder structure, safety switch and electric control system composition.
The rollers material for cold hard alloy iron, has high hardness &abrasion resistances. The temperature adjusting device, may to the general rollers within the steam and cooling water adjust the temperature to meet the technological requirement.
Turn the handwheel recoiler constitutive winding roller, can adjust the desired.
The machine is equipped with an braking brakes, emergencies, pull the security lever can immediately brake, which reduces the personal accident.
2.Features
1.Transmission with quality.
2.The rolls are made of chilled cast iron with wear-resistance hard surface.
3.The rollers are grooved.
4.The bored rolls can be cooled through inputting the steams and colling water.
5.The two rollers rotate with different speed ,so that rubber material can be processed
6.The Excellent crushing structure is open gear transmission
7.The product has IS09001 /CE/SGS standard.
3.Parameter of the Rubber Cracker
| Model |
XKP-400 |
XKP-450 |
XKP-560 |
| Roll Diameter*length |
400*600 |
450*760 |
560*800 |
| Roll Ratio |
1:1.38 |
1:1.38 |
1:1.39 |
| Front roll ratio |
17.16 |
23.43 |
27.14 |
| productivity |
70~600 |
1000 |
2000 |
| Motor power(kw) |
45kw |
60/75KW |
75/90kw |
| LxWxH(mm) |
4210*1850*1925 |
4550*1970*1860 |
5620x2260x1900 |
| Weight(kg) |
7500kg |
11000kg |
19000kg |
Steel Wire Separator
Application: The equipment is mainly used to separate the rubber and bead ring of the steel rings in various tires to get a complete bead ring.
1. The device is composed of frame, motor, reducer drive, motor and adjusting of the roller body device.
2. Trench roller is alloy roller, high hardness, wear resistance, can be repeated use, surfacing welding repair.
3. Simple structure, high efficiency, low energy consumption.
It is in tire circle mouth part separate the steel wire and rubber. Production capacity about 60 pieces per hour.
Steel wire separator mainly cooperate with the following equipment to realize waste tyre recycling work.
1) Ring cutter: It is used to cut off the bead and steel wall with steel wires from waste tires.
2) Strips cutter: It is used to cut the body of waste tire into strip type, so the strip can be feed to block cutter.
3) Block cutter: It is used to cut the waste tire strip into block with 5cmx5cm size.
4) Bead wire separator: It is used to separate the steel wires from the side wall of waste tires.
5) Tire crusher: The machine is used for extracting the steel ring inside the wire from the strips tire.
6) Conveyor, Vibration sifter and magnetic separator equipment
Output analysing
1). XKP400 rubber crusher:
Output: 6000-7200kg/24 hour for about 20 mesh granule.
2). XKP450 rubber crusher:
Output: 9600-12000kg/24 hour for about 20 mesh granule.
3). XKP560 rubber crusher:
Output: 10000-17000kg/24 hour for about 20 mesh granule.
4)XKP560B rubber crusher:
Output: 16000-20000 kg/24 hour for about 20 mesh granule.
){kind=link}