| Customization: | Available |
|---|---|
| Warranty: | 5 Years |
| Service Life: | ≥15 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HP200 Waste Tire Retreading Machine for Tyre Recycling
TECHNICAL PARAMETERS:
| TYPE | MOLD | CONTROL | DIAMETER(mm) | LENGTH (mm) | MEDIUM | DESIGN PRESSURE (Mpa) | TEMPERATURE (C) |
| ELECTRICAL | DN0102A.3 | AUTOMATICAL | 1000 | 2,000 | PRESSURE AIR | 0.35 | 120~310 |
| ELECTRICAL | DN0204A.3 | 2000 | 4,000 | 0.35 | 120~310 | ||
| ELECTRICAL | DN0206A.3 | 2000 | 6,000 | 0.35 | 120~310 | ||
| ELECTRICAL | DN0304A.3 | 3000 | 4,000 | 0.35 | 120~310 | ||
| ELECTRICAL | DN0410A.3 | 4000 | 10,000 | 0.35 | 120~310 | ||
| ELECTRICAL | DN0509A.3 | 5000 | 9,000 | 0.35 | 120~310 | ||
| 1. TYPE: Electical heating , steaming for boiler , circulation oil | |||||||
| 2. MEDIUM : air, water ,steaming, circulation oil | |||||||
| 3. CONTROL MANNERS : Manual ,semi-automatic and fully automatic | |||||||
| 4. Diameter, length ,design pressure and temperature fabrication under customers requirements . | |||||||
FEATURE:
1. High temperature fan inner made the heat evenly distributed
2. High quality insulating material, heat preservation effect is good
3. High temperature silicone seal is used by the vessel door, good seal
4. Fully automatic control system and manual operation control system is equipped
5. Alarming automatic when stoppage happened, and displayed the analysis of the stoppage on the screen
6. Heating tube working alternately in vulcanizing process, keeping the temperature steady
7. The biggest diameter of tire 1.3 meters for this model
8. Size can be designed according to customers' needs
APPLICATION:
Truck tyre, auto tyre, OTR tyre, motorcycle tyre
Our Services
1.pre-sale services
Act as a good adviser and assistant of client enable them to get rich and generous returns
on their investments.
1)select equipment model
2)design and manufacture products according to clients' special request
3)train technical personnel for clents.
2.services during the sale
1)Recheck and accept products ahead of delivery
2)Help clients to draft solving plans
3.after-sale services
1)provide considerate services to minimize client's worries.
2)Help client to solve the assembly question
3)take responsibility if any technical problem.
----------------------------------------------------
The following is our Product catalogue,if you have any interest,pls do not hesitate to
contact with us.
1) Banbury Kneader XSN-35, 55, 75, 110...
2)Open Mixing Mill XK-400, 450, 560...
3)Rubber Extruder (Cold Feed, Hot Feed)...
4)Rubber Calender...
5) Rubber Vulcanizing Machine...
6)Autoclave / Vulcanizing Tank...
7)Bale Cutter, Hosting Machine, Bath-Off Cooling Machine...
8)waste tyre recyclingmachine
){kind=link}