1. Rubber Internal mixer, Kneader, Banbury mixer & ( Version: XSN-75)
2. Rubber kneader with completely sealed condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production effciency and obtains excellent quality...
3. Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to be dispersed uniformly.
4. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant.
5. Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer.
6. Programmable logic controller (PLC) is adopted in theelectric-control system, which has reliable control function andalarm function, and interlock safety-protection function and itis procded with serial interface of net.
| Version & Parameters |
XSN-35/30 |
XSN-50/30 |
XSN-75/30 |
XSN-110 |
| Mixing capacity (L) |
35 |
55 |
75 |
110 |
| Main Power(kw) |
55 |
75 |
90 |
160 |
| Brake Motor (kw) |
2.2 |
3.0 |
4.0 |
5.5 |
| Tilting angle |
14.0 |
14.0 |
14.0 |
14.0 |
| Air compressor (kw) |
5.5 |
7.5 |
10 |
10 |
| Dust collector |
HLL-10 |
HLL-15 |
HLL-20 |
HLL-30 |
| Cooling water (MPA) |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
| Heating Steam (MPA) |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
| Electric Heater (kw) |
12 |
15 |
18 |
24 |
| Overall Size L× W× H (mm) |
3200× 1900× 2950 |
3750× 1950× 3050 |
3760× 2143× 3050 |
3930× 3000× 3660 |
| Weight(kg) |
6500 |
7800 |
10500 |
15000 |
Our Services
1.pre-sale services
Act as a good adviser and assistant of client enable them to get rich and generous returns
on their investments.
1)select equipment model
2)design and manufacture products according to clients' special request
3)train technical personnel for clents.
2.services during the sale
1)Recheck and accept products ahead of delivery
2)Help clients to draft solving plans
3.after-sale services
1)provide considerate services to minimize client's worries.
2)Help client to solve the assembly question
3)take responsibility if any technical problem.
){kind=link}