1. Mechanics design: The base adopts special mechanics design and the precision of the horizon is more accourate. The apperance of the machine is more beautiful as well as the high quality.
2. Material supply system: A special design of two-states material supply is employed. It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection system.
3. Injecton volum control: A design incorporating a high precision optical ruler made in Germany is employed. The injection volum can be caculated and controlled precisely.
4. Cold runner technology: Supporting mold is employed to provide water cycle to achieve cold runner technology, it can avoid dead material effectively to save raw material.
5. Vacuum design of mold: Adopting imported vacuum pump to achieve vacuum supply, it can ensure the quality.
6. Security design: A light curtain made in Japan ia avaiable. And an automatic warning system is available. It monitors the status of machine in order to provide extra protection to assure the operation safety fo operators.
7. Circuit board design: A full-scale oil system is adopted. The noise is low and the pressure is adjusted automatically and proportionally. It is very accurate and stable.
type |
400T |
Injection Cylinder Dia.(mm) |
110 |
Injection Pressure(kgf/cm²) |
2200 |
Thereotical Injection Volume(cm³) |
4000 |
Screw Dia(mm) |
50 |
Screw Speed(rpm) |
0-120 |
Clamping Force(KN) |
4000 |
Mould Opening Stroke(mm) |
550 |
Daylight of Heater Platen(mm) |
120 |
Min. Mould Thickness Range(mm) |
550 |
Distance Between Tie Bar(mm) |
940x920 |
Heater Platen Dimension(mm) |
850x850 |
Motor Power(kw) |
15 |
Heater Plate Power(kw) |
20 |
Vacuum Pump Power(kw) |
1 |
Temperature Controller Power(kw) |
6 |
System Pressure(kgf/cm²) |
200 |
Machine Weight(Ton) |
11.5 |
Dimension: LXWXH(mm) |
2600x3600x4500 |