Rubber refining machine
1. Structure
This machine consists of two rollers(waist drum model), base, frame, rack, transmission device, Bearing, Lubrication device, Decelerator, Adjustment device of the roller temperature, Emergency shutdown device and brake rigging, NGW Planetary hardened-gear Speed Reducer and etc.
2. Main Uses
One another point different from the open mixing mill: The roller is of waist drum model and mainly used for stripping away impurity substance of reclaimed rubber.
3. Features
(1. )Two rollers are made from Chilled Cast Iron, smooth surface is highly polished and scratch proof by cutting knife: High hardness and wear-resistant;
(2. )The roller is hollow structure, which is for adjusting the temperature of the rollers by steam or cooling water in term of different request;
(3. )The machine is equipped with an overlaod protection device to prevent the major components from being damaged due to overloading.
(4. )The machine is also equipped with an emergency device. When an emergent accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable.
(5. )The machine is equipped with scraper and wind-up unit, which can take the reclaimed rubber away from the wind-up roll
parameters |
XKJ400 |
XKJ-480 |
Front roll diameter |
400 |
480 |
Back roll diameter |
480 |
612 |
Roll length |
650 |
800 |
Front roll surface speed |
18.01 |
26.6 |
Friction ratio |
1: 1.88 |
1: 1.75 |
Max. nip |
10 |
15 |
Feeding capacity per |
-300 |
-500 |
Power |
55 |
75 |
Size |
4770*2300*1835 |
50702800*1978 |
Weight |
12800 |
20000 |
----------------------------------------------------
Qingdao Guangyue Rubber Machinery Manufacturing Co., Ltd
Add: Huangshan Economic Zone,Jiaonan, Qingdao City, China
Tel:+86-15205329050
Fax: +86-532 83123138
Website: qdguangyue57.en.made-in-china.com
----------------------------------------------------
Our Services
1.pre-sale services
Act as a good adviser and assistant of client enable them to get rich and generous returns
on their investments.
1)select equipment model
2)design and manufacture products according to clients' special request
3)train technical personnel for clents.
2.services during the sale
1)Recheck and accept products ahead of delivery
2)Help clients to draft solving plans
3.after-sale services
1)provide considerate services to minimize client's worries.
2)Help client to solve the assembly question
3)take responsibility if any technical problem
){kind=link}