| Customization: | Available |
|---|---|
| Drive: | Electric |
| Principle: | Inhaled |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Q69 Roller Type shot blasting machine for H beam
1 H beam and Steel plate shot blasting machine
2 Plate Wide1-3m,Length 6-12m,thickness5-60mm, or Customized
3 Shot blasting speed1~2.5m/min
4 Sa2 or Sa2.5
Usage:
Steel pretreatment line steel technology in the processing refers to the former (that is, a state of raw materials) for shot blasting the surface rust and painted with a protective coat of processing technology. After pre-treatment of steel products can improve the mechanical and corrosion-resistant metal components ability of anti-fatigue properties of steel, extending its life; but also can optimize the production process of steel surface, and is conducive to cutting machine CNC cutting and precision blanking . In addition, pre-processing of steel as a result of comparing the shape of the rules in favor of mechanical and automated spray paint rust, so the use of steel pre-treatment can enhance the efficiency of clean-up, clean-up operations to reduce labor intensity and the pollution of the environment. In recent years, as a result of the use of PLC control, automation equipment, greater emphasis has been improved.
1.Roller throuth type H Beam shot blasting machine Paramter:
|
Parameter |
Q698 |
Q6912 |
Q6915 |
Q6920 |
Q6925 |
Q6930 |
Q6940 |
|
The effective cleaning width(mm) |
800 |
1200 |
1500 |
2000 |
2500 |
3000 |
4000 |
|
Dimesion of inlet opening |
1600*800 |
1200*400 |
1700*400 |
2200*400 |
2700*800 |
3200*800 |
4200*400 |
|
The length of cleaning workpiece(mm) |
1200-12000 |
1200-1600 |
1200-12000 |
1200-12000 |
3000-12000 |
2400-12000 |
4500-18000 |
|
The speed of conveyer(m/min) |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
|
The thickness of cleaning steel sheet (mm) |
3-60 |
3-60 |
1.5-60 |
3-60 |
3-60 |
3-110 |
4.5-100 |
|
Shot ball flow rate (kg/min) |
4*120 |
4*250 |
4*250 |
6*250 |
6*250 |
6*360 |
8*360 |
|
The shot ball first loading (kg) |
4000 |
4000 |
4000 |
4500 |
4500 |
8000 |
11000 |
|
Roll brush adjusting height (mm) |
200 |
200 |
350 |
450 |
600 |
850 |
900 |
|
Air capacity(m3/h) |
22000 |
17560 |
19000 |
19550 |
27758 |
28050 |
38000 |
|
Total power (kw) |
90 |
78.3 |
113.5 |
156.6 |
204.8 |
224.55 |
293.6 |
2. Other Roller throuth type shot blasting machine Paramter:
| No | Name | Unit | Type1 | Type 2 | Type 3 |
| 1 | The width of the workpiece | mm | Under 2500 | under3500 | Under 4500 |
| 2 | Model | QXY2000, QXY2200, QXY2500 | QXY3000, QXY3200, QXY3500 | QXY3500, QXY4000, QXY4500 | |
| 3 | Plate width (Max) | mm | The number after QXY | The number after QXY | The number after QXY |
| 4 | Plate thickness | 3~60 | 3~60 | 3~100 | |
| 5 | The smallest section of profile | mm*mm | 60*80 | 60*80 | ------ |
| 6 | The largest section of profile | mm*mm | 1000*300 | 1000*300 | ------ |
| 7 | The shortest workpiece | mm | 2400 | 2400 | 2400 |
| 8 | Maximum workpiece | mm | 12000 | 12000 | 12000 |
| 9 | Conveyor speed | m/s | 1~5(Note) | 0.5~4(Note) | 4~6(single) |
| 10 | Derusting Quality Level | ISO8501-1,1988 | GB8923-88 | (Bsa2.5) | |
| 11 | Surface roughness | μm | 40~70 | 40~70 | 40~70 |
| 12 | Paint Film thickness | μm | 15~25 | 15~25 | 15~25 |
| 13 | Paint type | Quick-drying-type zinc-rich primer | Quick-drying-type zinc-rich primer | Quick-drying-type zinc-rich primer | |
| 14 | Installed Power | kw | According to the actual situation | According to the actual situation | According to the actual situation |
| 15 | Compressed air consumption | m3/min | 5~7 | 5~7 | 5~7 |
| 16 | Compressed air pressure range | MPa | 0.4~0.6 | 0.4~0.6 | 0.4~0.6 |
| 17 | The first addition of the shot ball | T | 8~10 | 8~10 | 12~16 |
If the above model not suit for your workpiece, please tell me your need and the following information then we will send you the best technical drawing to you.
){kind=link}