Xkp-560 Waste Tire Rubber Crusher Machine Xkp-400

• Customization: Available
• Warranty: 2 Years
• Service Life: ≥15 Years
• Model NO.: XKP-560
• Certification: Ce, ISO
• Voltage: 380V
• Structure: Horizontal
• Tire Machine Type: Tire Recycling Machine
• Rubber Mill Type: Rubber Crushing Mill
• Identification: ISO9001: 2008
• Type: General Rubber Machinery
• Type of General Rubber Machinery: Granulating Machine
• Type of Tire Machinery: Rubber Regeneration Machinery
• Transport Package: Wooden Case or According to Your Needs
• Specification: lubricating device and material plate
• Trademark: GUANGYUE
• Origin: China (Mainland)
• Production Capacity: 30sets/Month

Product Description

                                Xkp-560 Waste tire rubber crusher machine xkp-400

1. Application

The machine is to be used for raw rubber cracking and scrip rubber cracking in rubber reclaim industry.

2. Technical specifications

Front roll dia (smooth roll ) 560mm

Back roll dia (smooth roll ) 510mm

Roll working length 800mm

Front roll linear speed 24.96m/min

Rolls speed ratio 1: 1.315

Max. Roll space 20mm

Main motor power 90kw

Capacity 2.3~2.8(26meshes) t/shift

Overall dimensions 5030x2282x1980

About weight ~20

3. Main structure and characteristic

This is a double roll rubber-mixing machine. It consists of motor, gear-down reducer, driving gears, speed-ratio gears, front and back rolls, bearings, frame, cover, bed plate, adjusting pin device, emergency stop device, roll temperature adjusting device, lubricating device and material plate, etc.

Front and back rolls are parallel mounted in the bearing of frame. By means of reducer, driving gears, speed ratio gears, the motor drives the front and back rolls rotate toward each other so that rubber-cracking is begun. The rolls are made from chilled cast alloy iron; The inner of it is hollow. Steam and cooling water can pass through them so that the surface temperature can be adjusted. Its surface possesses higher hardness and fineness.

Roller bearing, copper bushing is fixed in the bearing base of frame. Back roll bearing bases are fixed up on frame, and the front roll-bearing base can slide in the guide-rail of frame.

Roll spacing adjusting is carried out by means of the reverse of hand wheel makes the thread rod drive front bearing base movement. The roll pin reduces when the hand wheel rotates clockwise, otherwise it will increase.

The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately.

Adjusting temperature device is two spray pipes with numeral rows of holes, extend the two pipes into the hollow roll, the holes are in the position of working section of the roll. The position of holes slants to 30 degree inner direction so that the spraying water and steam is directed at contacting angle of sizing material, this can control the surface temperature of roll.

Main technical parameters
	XKP-400	XKP-450	XKP-560
Working diameter of rear roller(mm)	400	450	560
Working diameter of rear roller(mm)	400	450	510
Working length of rollers (mm)	600	760	800
Surface speed of front roller(m/min)	20	23.2	25.56
Velocity ratio of rollers	1:1.38	1:1.38	1:1.30
Maximum gap between rollers(mm)	8	8	8
Capacity(kg/h)	180-300	250-400	350-500
Power(KW)	45	55	75
Dimension(mm)	3950 x 1800 x 1780	4770 x 1846 x 1835	5064 x 2284 x 1978
Weight(kg)	7000	10000	19000