1. Rubber Internal mixer, Kneader, Banbury mixer & ( Version: XSN-75)
2. Rubber kneader with completely sealed condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production effciency and obtains excellent quality...
3. Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to be dispersed uniformly.
4. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant.
5. Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer.
6. Programmable logic controller (PLC) is adopted in theelectric-control system, which has reliable control function andalarm function, and interlock safety-protection function and itis procded with serial interface of net.
| Version & Parameters |
XSN-35/30 |
XSN-50/30 |
XSN-75/30 |
XSN-110 |
| Mixing capacity (L) |
35 |
55 |
75 |
110 |
| Main Power(kw) |
55 |
75 |
90 |
160 |
| Brake Motor (kw) |
2.2 |
3.0 |
4.0 |
5.5 |
| Tilting angle |
14.0 |
14.0 |
14.0 |
14.0 |
| Air compressor (kw) |
5.5 |
7.5 |
10 |
10 |
| Dust collector |
HLL-10 |
HLL-15 |
HLL-20 |
HLL-30 |
| Cooling water (MPA) |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
| Heating Steam (MPA) |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
| Electric Heater (kw) |
12 |
15 |
18 |
24 |
| Overall Size L× W× H (mm) |
3200× 1900× 2950 |
3750× 1950× 3050 |
3760× 2143× 3050 |
3930× 3000× 3660 |
| Weight(kg) |
6500 |
7800 |
10500 |
15000 |
1. Mixing & Rotor
Mixing:W-shaped boody
Surface is plated with hard choroium
Rotor:Abrasion resistant hard alloy
Plated with hard chromium
2. Transmission System
Hardened tooth-surface reducer, Compact structure
Higher transmission efficiency
Lower noise
Longer Service Life.
3. Hydraulic Turnover
Flip effect, high efficiency, no noise.
High output internal kneading machine High output internal kneading machine High output internal kneading machine
4.Electric-Control System
Imported PLC Device
Full-Automatic Control
Easy to exchange the modes and reliable to operate the controller.
5.Heating and Cooling System
PLC Control the temperature.
Heating and cooling fastly
Accoring to different requirements,the mixing materials may be heated by hot steam or cooled by cold water.
6. Bearing&Sealing
Bearing:Provide15years Service!
Sealing:Provide10years Service!
High-intensity Seal Ring
Promise the oil will not leak
Provide 10 years Service!
High output internal kneading machine High output internal kneading machine High output internal kneading machine
7. With completely sealed condition, materials are mixed or plasticated under Certain pressure , controllable temperature , which makes high production Efficiency and obtains excellent stale quality
8. Spiral angle and over lapping length of blades of the rotors are in good design and make the material to be dispersed uniformly.
9. Surface where is contacted with the materials are all plated with hard chromium and Polished , which is corrosion-resistant and wear-resistant
10. Jacket construction is adopted in parts that surfaces contact with materials to achieve Excellent water-cooling and steam heating effect and fit in with the needs of plastics And rubber processing technology .
11. Programmable logic controller(PLC) is adopted in the electric -control system, which System , which has reliable function and alarm function , and interlock Safety-protection function and it is provided with serial interface of net.
12. CE standard
){kind=link}