Hydraulic Rubber Cutting Machine for Reclaimed Rubber/ Reclaimed Rubber Cutter
Usage of rubber cutter:
This rubber cutter is mainly used to cut the natural rubber,synthetic rubber and other plastic materials,especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
Product Profile:
This rubber cuttermainly consists of cutting knife,frame,cylinder,base,auxiliary table,sydraulic system and electric system.The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife.When cutting the raw rubber,put the raw rubber under the cutting knife,the press the start button,the knife can cut the rubber.Two limited switches are installed on the frame to control the reversal valve to change the movement direction of the knife,at the same time,it protects the cover of the cylinder.
Single Kinfe Vertical Rubber Cutter:
1. Using high hardness and high precision circular knife cutting, pneumatic feed, pneumatic the tailstock (the tailstock has owe pressure protection device);
2. Cutting spindle replaceable steering, satisfy customer's different way to cut,
3. According to the customer's need to increase the feeding diameter to ø 300mm, at circular knife parts increase drive motor and reducer, knife seat installs the precision linear guide bearing, make cutting more stable, cutting out of finished edge is more beautiful, especially suitable for cutting large diameter of bubble surface materials;
4. Can increase the sword type flat knife slitting structure (manual cutting machine slitting functions), can be manual pushing flat blade for cutting, more convenient, meanwhile slitting flat end face, Cutting spindle domains on PE hose protect knife, prevent blade bruising,
Operation is very simple; 5. Slitting length by hexagon positioning shaft decision, can set up six basic slitting width,also in six basic width of cutting, multiple cutting width accurate location.
Technical Parameters of rubber cutter:
Model |
XQL-80 |
XQL-160 |
Knife Width(mm) |
660 |
1000 |
Knife Stroke(mm) |
680 |
680 |
Diameter of the Piston(mm) |
150 |
150 |
Time Taken by the Stroke(s) |
16-25 |
16-25 |
Motor Power(KW) |
5.5 |
5.5 |
Overall Dimension(mm)(L*W*H) |
1900*720*2580 |
2240*720*2580 |
Machine Weight(Kgs) |
1000 |
1600 |
Remarks |
Can be equipped with working table according to cutomers' requirements |
Machine pictures:
Our certification:
Audited Supplier 
){kind=link}
){kind=link}