2800X9000 Steam Vulcanizing Tank With CE ISO
Temperature, pressure, time, adopt the automatic control, stable and reliable performance, convenient use, is a traditional vulcanizing tank equipment, 0.6-3.0 Mpa design pressure, design temperature 150-220 ºC, 600-5000mm in diameter, length between 1000-60000mm, accounding to the product technical requirements for individual design customized for clints, Steam tank bottom enters, controlled by the automatic control valve at the tank bottom setting steam,the steam vertical diffusion tube arranged in the tank bottom, small and medium-sized mouth diffusion tube(3mm, 4mm,5mm) arranged according to certain rules and angle offset, to ensure that the steam into the tank after the temperature even spreading around, prevent the uneven steam diffusion caused by the different product quality. After setting precess, automatic control system for heating, heat preservation, sulfide, vulcanization after send out sound and light alarm and automatically stop working
II.Benefits of tyre retreading
The benefits of retreading are that it is both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".
To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!
To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed
|Effective length (mm)||1200||1500||1800||2000||2200|