50T Automatic Rubber hydraulic Vulcanizing Press molding machine![]()
1. Structure
Vulcanizing press generally consists of four parts, a clamping institutions, two control systems, three pressure system, four heating system.
![]()
2. Main uses
This equipment is used for vulcanizing either several sheets adhesive tape for transporting or several corresponding size rubber plague.
![]()
3. About our products:
1. Easy operation and repair.
2. The vulcanizing machine is mainly use to produce rubber pads, Each working layer equipped with two sets moulds, it can take turn vulcanization. Thereby improve production efficiency
3.the center distance in certain, allowed to install large diameter of hydraulic cylinder, which can reduce the hydraulic cylinder the amount, and the simple structure, maintenance is less.
4. The beam in the section of force is reasonable, the modulus needed than live in small, can reduce weight
![]()
5. Manufacturing installation is simple, pipe configuration, whole hidden appearance tidy and beautiful. Box type flat-band plate vulcanizing machine single box board the lateral stiffness ratio of the poor, but because the mast frame type flat-band plate vulcanizing machine frame by frame board are a combination of multiple, so the machine has enough lateral stiffness.
![]()
4. Our strength
1 manufacturer direct sale can ensure delivery time and quality.
2 plunger diameter differences are very small, which ensure pressure.
3 our vulcanizing press is equipped with automatic controlling temperature and pressure, automatic alarm, automatic loading, emergency stop, digital readout and son on.
4 low noise, no oil leakage, no pressure off.
5 small temperature difference of hot plate, Plate temperature tolerance: ±1°C, which follows the national standard.
6 the parallelism difference does not exceed ±0.01-0.02mm
7 heating method according to your request: electricity, steam heating, conduction oil heating.
8 we can make machine according to your request.
9 we can give a discount according to your quantity.
Parameters of Rubber vulcanizer
| Parameters/version |
XLB350*350*2 |
XLB400*400*2 |
XLB500*500*2 |
XLB600*600*2/4 |
XLB750*850*2 |
XLB1000*1000*2 |
| Mould closing force |
0.25 |
0.5 |
0.8 |
1.0 |
1.6 |
2.5 |
| Hot plate spacing |
125 |
125 |
125 |
125 |
125 |
200 |
| Hot plate layer |
2 |
2 |
2 |
2/4 |
2 |
2 |
| Plunger stroke |
250 |
250 |
250 |
250/500 |
250 |
400 |
| Heating way |
Electricity/stream |
Electricity/stream |
Electricity/stream |
Electricity/stream |
Electricity/Stream |
Electricity/stream |
| Main motor power |
2.2 |
2.2 |
2.2 |
2.2 |
3 |
5.5 |
| The thermal power |
2.4kw/board |
3kw/board |
3 |
7.5kw/board |
9kw/board |
10.8kw/board |
| Size(l*w*h) |
1450*400*1350 |
1600*400*1440 |
1450*690*1818 |
1880*780*1660 |
2100*1010*1900 |
2400*960*2500 |
| Weight(kg) |
1200 |
1500 |
1700 |
2500/3100 |
3560/4300 |
8300 |
| Platen unit area pressure |
2.04 |
3.13 |
2.52 |
2.78 |
2.51 |
2.5 |
){kind=link}
){kind=link}