X (S) N-3 3L Laboratory Banbury
|FOB Price:||US $2,000-45,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $2,000-45,000/ Piece|
|Production Capacity:||100 Set/Month|
|Payment Terms:||L/C, T/T|
- Model NO.: X(S)N-3
- Control Type: PLC
- Power Source: Electric
- Type of General Rubber Machinery: Material Processing Machine
- Rotor: Chrome Plated
- Control System: PLC
- Trademark: guangyue
- Specification: 3 liters 3L
- HS Code: 8477800000
- Warranty: 2 Years
- Automatic Grade: Automatic
- Type: Rubber Mixer
- Type of Tire Machinery: Rubber Regeneration Machinery
- Seal: Good Seal Without Dust Leakage
- Gear Box: Hardened Tooth with Good Effciency
- Transport Package: in Bulk or as Per Customer′s Request
- Origin: China
Qingdao Guangyue Rubber Machinery Manufacturing Co,. LTD
1Equipment application and operation requirements1.1 Main application: this rubber kneader is mainly used for plasticating and mixing of natural rubber, synthetic rubber, reclaimed rubber other polymers and etc.
1.2 Operation requirements A. running environment: altitude<1000m,
temperature: 5ºC-40ºC, max. relative humidity 95%
B. Power supply: AC380V, 50Hz, 3-phase
C. Cooling water pressure: 0.2-0.4Mpa
Cooling water temperature: <25ºC±3ºC
D. Compressed air pressure: 0.6-0.8Mpa
Compressed air consumption: about 18m³/h
2 Main technical parameters
Working volume of mixing chamber 3L
Batch capacity(as per S.G. of 1.15) 1-5kgs
Total volume of mixing chamber 8L
Batch feeding type rear feed
Main motor power AC3.75kw
Rotor type 2-wing tangential
Rotor speed (front/rear) 32/25.8r/min
Chamber tilting angle 110°
Tilting motor power 1.5kw
Compressed air pressure 0.5-0.8Mpa
Cooling water pressure 0.2-0.4Mpa
Overall dimensions (L×W×H) 1883×1053×2220mm
Shipping dimensions(L×W×H) 1880×1050×2200mm
Approx. weight 800kg
3 Supply range
Main motor 1set
Rotor assembly 1set
Mixing chamber assembly 1set
Tilting device 1set
Compound pressing device 1set
Pneumatic system 1set
Cooling/heating pipeline system 1set
Electrical control system 1set
4 Following items prepared by end user
A. Power cables from power supply to electrical control cabinet, power cables from
electrical control cabinet to kneader main motor and power cables from titling
motor/hydraulic pump motor to electrical control cabinet.
B. All pipelines outside rotary joints.
5 Fabrication and technical standards
5.1 Bedplate: welded by superior U steel and high-quality steel plate.
5.2 Mixing chamber: "W" shape jacket structure, consisting of chamber body and side plates, all of which are welded by superior steel plate through aging treatment, inner side walls are hard chromium coating up to 0.12-0.15mm thick, hardness is around HRC50. Cavity of the jacket could pass through cooling water or heating steam. There is a plug-in type thermocouple fitted at bottom of the chamber, which is used for monitoring compound temperature.
5.3 Rotor assembly: rotor assembly is made up of rotor shaft, rotor body and rotor wing blades, rotor wing blades and other working surfaces are through processing and polishing, hard chromium coating up to 0.12-0.15mm thick, hardness is around HRC50. Rotor shaft is with hollow structure, where there are pre-made holes extending to hollow cavity of the wing blades, therefore, forced cooling or heating rotor is possible. Dust stop of rotor ends are adopted with inlay type alloy moveable ring and fixed sealing ring. Inlay type alloy movable sealing ring is up to 8mm thick, hardness is around HRC55, the fixed sealing ring is made of 10-1 copper, which is embedded PTFE with self-lubricating function, this dust stop system is pretty reliable and featuring of an extra long service life.
5.4 Frame: welded by high-quality carbon constructional steel plate through vibration treatment.
5.5 Main air cylinder: cylinder inner side walls are through fine polishing treatment, so as to increase service life.
5.6 Upper ram: "M" shape jacket structure, welded by high-quality steel plate, through aging treatment and polish processing, hard chromium coating up to 0.12-0.15mm thick, hardness is around HRC50. There is inlaid wear-resistant sealing strip made of bakelite resin surrounding the ram. Jacket cavity of the upper ram could pass through cooling water or heating steam to achieve specific mixing result.
5.7 Tilting device: mixing chamber tilting device is driven by motorized worm &gears or hydraulic oil cylinder powered by hydraulic station.
5.8 Main motor: installation dimension and power grade are all in line with international standards.
5.9 Hard-tooth gear box: made of 20CrMnT, through carburizing and quenching treatment.
6 Key purchased parts brand
|1||Main motor||Liaoning Beilong Motor Group Co., Ltd, first-class OEM in China|
|2||Gearbox||Third party processing hardened gears in-house assembling and testing|
|3||Bearings||ZWZ, the best brand domestic China|
|5||Other low voltage electrical parts||Chint, public listed company, the best one in China|