full automatic Waste tire recycling machine / Used Tyre Cutting Machine
Specifications
1.Waste tire shredder machine
2.Make waste tire break into powder
3.Make the tires of steel fiber is completely separate
waste tyre shredder machine / car tire shredder machine
1.tire shredder machine
this machine is a special equipment for crushing waste steel wire radial tyre under normal temperature, used for take out the steel wire of tyre in the scope of the size.
2.Characteristic:
this machine has the structure compact, advance technology, low powder consumption, high efficiency, crushing room with off-structure. Easy to maintenance etc. The machine adopting excellent hard alloy steel as it blade, highly hard and wearable is druable; circle mesh screen has grindding structure, dropping pieces with large area is good for the rubber pieces.
Model |
LPS800 |
LPS1200 |
Specification of raw material |
≤800 mm |
≤1200 mm |
Specification of Finished material |
50*50 mm |
60*60 mm |
Capacity |
2-4 t/h |
3-6 t/h |
Mototr power |
48 kw |
114 kw |
Dimensions |
2450*2140*2490 mm |
4000*3100*3500 mm |
Weight |
4.8 t |
17.5 t |
Structural features
The shredding chamber is closely mated with the lefthand drive. The power will be effectively transmitted to the cutter shaft. The cutter consists of blade and hooks. Anti-wear and corrosion proof hard alloy is built-up welded on the working face of the cutter
The shredding chamber is a combined structure and the cutter shaft adopts rolling bearings ,which is convenient for both installation and maintenance
The cylinder sieve will repeatedly sent those unqualified chips or shivers back to shredding machine , while whose qualified ones will be let out of the sieve.
The transmission system adopts a NGW plantary hardenedgear. speed reducer , which is structured with features of lower noise , high efficiency and longer service life.
The configuration of the shredder is compact and collated . it is easy and reliable for operation and convenient for installation and maintenance
parameters of tire shredder
Specification |
LP-1500 |
LP-1200A |
LP-800 |
Cutter quality |
15 |
22(18) |
16 |
Rotating speed of cutter shaft (r/min) |
10 |
15(13) |
16 |
Capacity (kg/h) |
2000 |
2000 |
1000 |
Feeding requirement |
≤1200 |
≤900 |
≤750 |
Discharging (mm) |
Strips( 100mm wide) |
Strips(50mm wider) or blocks (50*50mm) |
Strips(50mm wider) or blocks (50*50mm) |
Main motor power |
55*2 |
75 |
45 |
Speed reducer |
Hard facing gear reducing |
Overall diamensions |
4950*2000*3050 |
5960*2800*3390 |
4100*2100*2280 |
Weight |
23000 |
14500 |
7000 |
Semi Automatic and full automatic tire recycling machine price
waste srap old used tyre recycling rubber powder plant machine price
1.Ring cutter
This machine mainly used to cut the sidewall of steel wire tire ,and then to the next step of segmentation .First, put the tire on the platform, then rotate the hand wheel , the three claws will stick the inner tire firmly ,Second ,Starting power,work platform will rotation ,cutting tool according to need to cut tire slowly step by step . until the tire side cut off.
Item |
Specification |
Ring cutter |
motor power |
5.5 |
Speed of main screw |
46.8 r/min |
Max Diameter of tyre |
1200mm |
Dimension |
1100*900*1700 |
2.Strips cutter
strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires.
Item |
Parameter |
Strips cutter |
Motor Power |
5.5kw |
Disc Diameter |
380mm |
Rotate Speed |
18.4r/min |
Dimension |
1290*870*1550 |
3.Block cutter
Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.
Item |
Specification |
Block cutter |
motor power |
11kw |
Speed of main screw |
420 r/min |
Out diameter of cutter |
200mm |
Dimension |
1130*830*1100 |
4.Bead wire separation
Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .
Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.
Item |
Specification |
Bead wire separation |
Motor power |
15 KW |
Linear speed of front roller |
15.5 m/min |
Ratio of speed |
1.1 |
Dimension |
1520*1150*12101mm |
5.Tyre crusher
This machine is mainly used to crush waste tire and rubber .the structure is gear transmission
Rubber crushing mill machine
The roll is made of chilled cast iron with vanadium and titanium alloys. The roll face is hard and anti-wear. Both the front roll and the back roll are plaim. The internal cavity of the roll is processed to make temperature well proportioned on the roll surface.
The machine is equipped with an overaload protection device to prevent the major components from being damaged due to
overloading.
The machine is also equipped with an emergency device. When an emergent accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable.
The machine is applicable for breadking scrap rubber and raw rubber, also breaking radial steel tires and ordinary tires.
model |
XKP-400 |
XKP-450 |
XKP-560 |
working diameter of front roll(mm) |
400 |
450 |
560 |
working diameter of back roll(mm) |
400 |
450 |
510 |
working length of rolls(mm) |
600 |
650 |
800 |
linear speed ratio of rolls(m/min) |
18.65 |
24.5 |
25.16 |
linear speed ratio |
1:1.27 |
1:1.27 |
1:1.28 |
max gap(mm) |
10 |
10 |
15 |
output(kg/h) |
200-400 |
400-600 |
2000 |
overall dimension(mm) |
3850x1800x1550 |
4650x2000x1550 |
4750x2300x1750 |