Applications:
1. Used for vulcanizing all kinds of rubber and plastic model products, and non-model products.
2. This machine are column structure and downward pressing type(upward pressing type).
3. The piston rises with the effect of working fruid, while it goes down(namely hot plate to open) by the hot plate, flat-bed and the self-weight of the piston, which drive the working fruid flow back to the storage tanks, serving the purpose of the piston falling(namely open)
Equipment function
1, hot plate normal curing time the mutual difference between the measuring points ± 3 ° C control.
2, taking into account the heating temperature uniformity, each piece of hot plate shall consist of steam in and out (7.7 meters in three), and install the temperature sensor in hot plates on each floor.
3, PLC touch screen for the temperature display on the console display and temperature, pressure, pressure overload alarm system. Tip temperature biases and pressures at all levels, and enable operators to take appropriate measures.
4, equipment between 145-160 ° C curing temperature control, pressure control between 0.8Mpa-24Mpa. 5. PLC and control systems have the following features:
(1) storage of curing process temperature, pressure, time data.
(2) the screen displays the current time-pressure-temperature, time, and query historical data at any time, in order to trace back the quality problem.
(3) smooth tread huagou exhaust, when the stress of the exhaust, exhaust, exhaust the number of fractional seconds can be set on the screen.
(4) the exhaust when vulcanizing pressure up to level 6 after the progressive compression, users are able to set a per-level pressure values and intervals, after the creation of the whole curing process automatically.
Model features
1, movable platen locking, quick of rising fast, slow decline in function. Guan Mo go slowly and exhaust fast moving slower to adjust, improve production efficiency.
2, product vulcanizing forming oil pump motor stops working, and has the function of automatic pressure compensation and pump stop delay. Circuit configuration is more reasonable and reliable.
3, put the air-time, number of gas, heating, curing time can be set, easy to operate.
4, with auto and semi-auto modes. Set the way a conventional curing presses work program I? Transfer work? Procedure? Meet the technological requirements of special rubber compound.
5, hydraulic cylinder applied advanced technology, it is reliable to seal, have long performance life.
6, electrical system using PC/PLC computer-controlled, full touch screen control more convenient, accurate, and reliable.
7, hydraulic gear pump stations using imported technology and high-pressure vane pump combination, hydraulic devices, proportional pressure and flow compound control valve. Low noise, low energy consumption.
| Parameters |
XLB350*350*2 |
XLB400*400*2 |
XLB450*450*2 |
XLB500*500*2 |
XLB600*600*2 |
XLB750*850*2 |
XLB1000*1000*2 |
| Mold closing force(MN) |
0.25 |
0.5 |
1.0 |
0.8 |
1.0 |
1.6 |
2.5 |
| Distance between plats |
125 |
125 |
150 |
125 |
125 |
125 |
200 |
| Working layer |
2 |
2 |
2 |
2 |
2/4 |
2 |
2 |
| Power of plate |
2.4kw |
3kw |
3kw |
3kw |
7.5kw |
9kw |
10.8kw |
| Main motor power |
2.2 |
2.2 |
2.2 |
2.2 |
2.2 |
3 |
5.5 |
| Heating way |
Electricity/steam |
Electricity/steam |
Electricity/steam |
Electricity/steam |
Electricity/steam |
Electricity/steam |
Electricity/steam |
| P lunger stroke |
250 |
250 |
300 |
250 |
250/500 |
250 |
400 |
| weight |
1200 |
1500 |
1600 |
1700 |
2500/3100 |
3560/4300 |
8300 |
Audited Supplier 
){kind=link}
){kind=link}